Advanced Photogravure, Sept 11-14 2023
Experiment with cutting edge experimental gravure printing. Master the calibration process.
WHAT TO BRING ACCOMMODATIONS, HOURS, & INFO Cancellation Policy
Registration Fee: $450, Total Fee: $1750
This workshop is aimed squarely at those who have attended one of our direct to plate photogravure workshops. There are two tracks to choose from when you attend this workshop:
Analogue track is for people who want to bring their analogue etching skills to the next level with advanced ink mixing, multi-plate registration prints, chine collé printing, or even color photogravure. With creativity at the wheel there is no telling where the workshop might head. Our goal is to broaden your horizons as to what is possible and to break new ground in your own workflow.
Digital track is for people who want to fully learn the calibration process from start to finish. In this track you do the entire calibration for a unique ink-set with our guidance and teaching. You go through all the pitfalls that you need to cross when setting up and calibrating your own etching studio. You leave this class ready to go without help from us over the phone.
READ ABOUT OUR starting GRAVURE COURSES HERE
What to Expect . . .
This is a hands-on workshop. We teach you and then you do the work and learn it first-hand. And unlike other workshops where you may spend a full week to only get two plates and four prints made, in this workshop you may well walk out after four days with 7-10 plates and 14-20 prints if you are inclined to really only work in the etching studio on the analogue track. If you are on the digital track you will walk out of the workshop with INDEPTH knowledge on setup, calibration, and the full high-quality life-cycle of this process as well as a personalized prescription for exactly what you need to procure in order to fully set up your studio. After the advanced workshop digital track we follow up to verify everything is set and going well in your studio.
What to Bring
A Laptop (Macintosh preferred): The studio does not provide computers. You should bring a laptop. But, the studio does provide calibrated displays which can be connected to your laptop! That make’s things easier especially when using the studios systems which are designed to match to display. We have enough USB-C/Thunderbolt v2 and v3 adapters for all laptops (aka any Mac laptop from 2012 onwards) but if you have a non-standard computer bring a connector that goes from your laptop and connects into the female "DisplayPort" fitting on the monitor.
Digital Images and original work: Bring a hard-drive of digital images (at least 10 to work on). Ideally bring images that you've printed before and know well and bring raw images that you want to work on from scratch. Bring some film too if you are a medium or large-format photographer as we always do a bit of drum scanning for people if they want to utilize film originals later in the week. If you are not doing "photo" printing that is fine. As long as you have some way to work with your images digitally that is all that is required. Remember though, this is a monochrome class. If you only have color images that is fine, we'll be converting them to black and white for printing.
Install the required software: We require Photoshop be installed on your computer for some of our demos. Lightroom is a good alternative as well but there are things that Photoshop can still do today that Lightroom can't. If you are normally a Photoshop person that is fine. If you a Lightroom person bring a laptop with both installed. Install Excel (it does not have to be activated). Everything else will be provided to you!
Accommodations, Hours, and Info
LOCATION AND HOURS:
The studio is located at 17 Powder Spring Road, Topsham, Vermont 05076. It is registered with Google Maps and you can trust Google directions to our studio. The studio is open to students, and instruction is provided from 12:00 PM - 500 PM. Your instructor sets time for demonstrations, a mid-day snack, critiques and clean up. On Wednesday we try to have a paella party in the Summer when weather permits. In the Fall we try to do something similar. But, we do keep the studio open later on Wednesdays. We also encourage sharing your work on Wednesday early evening. So plan for staying a bit later on Wednesday to share, eat, or get a bit more printing done! Your traveling partners are welcome to the Wednesday night party.
Our nearest airport (75 minutes) is Burlington International Airport (BTV) in Burlington, VT. Other airports are Manchester-Boston Regional Airport (MHT) (130 minutes) and Boston-Logan (180 minutes). There are car rentals as well as private taxis and shuttles between the airport in Burlington, VT and East Topsham.
The amount of lodging near us is very limited. You must make reservations early if you want to be within walking distance of our studio. There is a small B&B with friendly owners and excellent breakfast and 5 minute walk: http://www.vermontbackintime.info/
Rest Haven is the closest Inn to our studio. They are located in West Topsham (an 18 minute drive) They can provide meals. They have five different guest rooms.
Lake Morey Resort (25 minute drive)
Gibson House Bed & Breakfast (30 minute drive)
Millstone Inn, heart of the old Websterville granite quarries (25 minutes drive)
Firehouse Inn, an old firehouse converted into a restaurant and inn (25 minutes drive)
Maplecroft Bed & Breakfast (25 minutes drive)
The Lyme Inn (40 minute drive)
Dowd's Country Inn (40 minute drive)
Breakfast on the Connecticut Inn (40 minute drive)
Norwich Inn and Brewery (40 minutes drive)
Betsy's Bed and Breakfast (45 minutes drive)
The Inn at Montpelier (45 minutes drive)
Capital Plaza Hotel (45 minutes drive)
Hannover Inn (upscale and fine dining) (45 minutes drive)
Six South Hotel (45 minutes drive)
Stillwater State Park (camping) (20 minutes drive)
Because these workshops are small and your cancelling adversely affects the program, Cone Editions has both a very generous and a very strict cancellation policy.
We collect a deposit payment if you sign up more than 30 days in advance of a workshop. All workshops must be fully paid 30 days in advance.
If you withdraw more than 30 days prior to the start date of your workshop, all payments made will be refunded, minus a cancellation fee equal to 50% of the deposit.
If you withdraw between 30 and 15 days prior to the start date of the workshop, all payments made will be refunded, minus a cancellation fee equal to 50% of the workshop tuition, unless Cone Editions or you can supply a replacement, in which case you will receive a full refund minus a cancellation fee equal to 50% of the regular deposit amount associated with that workshop.
If you withdraw less than 15 days prior to the start date of the workshop you will receive no refund, unless Cone Editions or you can supply a replacement, in which case you will receive a full refund minus a cancellation fee equal to 50% of the regular deposit amount associated with that workshop.
There are no exceptions to these policies and Cone Editions is not responsible for cancellations due to medical or other emergencies. Should Cone Editions have to cancel a workshop, all fees and deposits are refunded in full or may be transferred to another workshop within 12 months. Cone Editions is not responsible for reimbursement of non-refundable airline tickets in the event of a workshop cancellation. We strongly recommend that you purchase trip cancellation/travel insurance.